Front Brake Hose,DOT approved SAE J1401 1/8"HL EPDM,pressure tested upto 3,000 psi,OEM quality for brake and clutch system of cars
Front Brake Hose consist of five layers.(EPDM rubber inner tube,first reinforcement textile braid in PVA, adhesive coating,second reinforcement textile braid in PVA,outer protective cover of EPDM rubber.)Our front brake hoses conform to SAE J1401 and DOT standard FMVSS106.Each brake hose assembly is pressure tested up to 3,000 P.S.I. to ensure the safety.
|Inner Diameter||Outer Diameter||Inner Layer||Double Braid||Outer Layer|
|1/8inch 3.2mm||0.413inch 10.5mm||EPDM||PVA||EPDM|
|3/16inch 4.8mm||0.492inch 12.5mm|
Front Brake Hose Features:
Advantage & Application:
Long length of rubber brake hose can be reached 50m,100m,200m .etc without any joint; and our hose is durable,resilient,and will last for a long time without having to be replaced. Widely using cars, passenger cars, trucks, trailer, Jeep, SUV,multi-purpose passenger vehicle, light commercial vehicle, light truck, middle bus, MPV, LCV, RV, recreational vehicle, burden carrier, tow tractor, off-road, racing car,motorsport, tuning car, modified car, motorcycle, ATV, UTV, snowmobile, three wheeler, antique car, vintage car, classic car etc. Including American cars, Germany cars, French cars, Italian cars, Sweden cars, British cars, Japanese cars, Korea cars, Chinese Cars, Indian cars etc. for all vehicles with hydraulic brake and clutch system including drum brake and disc brake conversion etc.
OEM quality brake hose assembly application to CURA/ALFA ROMEO/AUDI,BMW/BUICK/CADILLAC/CHEVROLET/CHRYSLER/CITROEN/DAEWOO/DAIHAT SU/DODGE/FIAT/FORD/FSO/GMC/HONDA/HYUNDAI/INFINITI/ISUZU/IVECO/JAGUAR/JEEP/KIA/LANCIA/LAND ROVER/LDV/LEXUS/LINCOLN/LOTUS/MAZDA/MERCEDES BENZ/MG/MINI/NISSAN/OPEL/PERODUA/PEUGEOT/PORSCHE/PROTON/RENAULT/ROVER/SAAB/SEAT/SKODA/SMART/SUBARU/SUZUKI/TAXI/TOYOTA/VAUXHALL/VOLK SWAGEN/VOLVO.
Front Brake Hose Specification:
|Test Items||Test Condition||Standard||Test Results|
|Burst||4000psi×2min;pressure rated 25,000±10,000psi/min||>7000psi No seepage||>9,500psi|
|Cold Bend||-45°C ~-48°C× 72h, 3-5s,bending180°||No cracking||No cracking|
|Ozone||100pphm×70h×40°C, 7X||No cracking||No cracking|
|Impulse||146°C 1±0.1min at 1600psi+70||>7000psi No crack||>7300psi|
|Compatibility||120°C × 70h||>7000psi No seepage||>8000psi|
|Salt Spray||5%NaCl, 24h,water cleanout in 35°C||No red rust||No red rust|
|Water Aging||Water in 85±2°C,after 70h~72h 4000psi × 2min;pressure rated 25,000±10,000psi/min||>7000psi; >35h; >1446N||>10050psi;>55h; >2000N|